A digital TV tuner built into a HD Ready TV is not necessarily able to receive and decode HD signals. The tuner itself needs to be HDTV labeled and it is recommended to contact the retailer or manufacturer to be certain what type of tuner the TV has.

This may differ depending on the retailer in your country. To be completley sure please check with your retailer. This shows if an extra stand or cabinet is included from retailer.

What technology is the TV based on?
Tube- The most common technology. Today there are several types of picture tubes, among others flat tubes that give a very sharp and flicker free picture. The main disadvantage with tube technology is that most tubes are fairly cumbersome, so these types of TVs generally take up quite a bit of space.
Projection-TV - Instead of one picture tube these TVs have three. A red, a blue and a green cathode ray tube. The advantage is that you can easily project to a large surface area without too much loss of quality. A disadvantage is that it is still very expensive to buy.
Plasma - Incredibly thin and lightweight, Plasma TVs are capable of being mounted on your wall like a painting. Unfortunately they are still very expensive.
LCD - LCD stands for Liquid Crystal Displays. It is a flat panel technology which uses liquid crystals sandwiched between two glass plates. Can be even thinner than plasma screens and has a better viewing angle.

Picture size is measured in inches.
An inch is 2.54 cm. The size of the screen is measured diagonally from corner to corner.

The filter shows whether the TV has the capability to receive a 24p signal. It is not certain the signal gets displayed in a correct way.

Film gets shot at a frame rate of 24 images per second. However, the most common TV-systems displays the image at a rate of 50 times a second (50Hz).

Blu-Ray and HD-DVD discs stores films in its original format, 24 images per second. Some DVD-Players have the capability to send this format thru to the TV and here is where this specification gets important.
In order to show that kind of signal properly, the TV needs to be able to display or at least support incoming formats such as a 1080p in 24fps.

The contrast ratio is interpreted in a wide variety of ways. Some retailers and/or manufacturers states the dynamic contrast while others choose to show the static contrast ratio. These two values can differ quite much. A TV can have a dynamic contrast ratio of 1600:1 while the static contrast is 800:1. We recommend that you look at the product for yourself if you want to be certain of its contrast ratio.

The scanning frequency.
50 Hz - The picture is updated 50 times per second.
100 Hz - The picture is updated 100 times per second, giving a sharper picture with less obvious "flicker".

The TV can receive and display a minimum resolution of 1920x1080, also called 1080p.The expression "Full HD" is not a standard given by any organization, its just an expression set by the market to distinguish the different HD resolutions for different TV models.

The number 1080 represents 1,080 lines of vertical resolution, while the letter "p" stands for progressive scan or non-interlaced. 1080p is considered as true or full HDTV video mode.

The term usually assumes a widescreen aspect ratio of 16:9, implying a horizontal (display) resolution of 1920 dots across and a frame resolution of 1920 × 1080 or exactly 2,073,600 pixels.

A television with progressive scanning can generate a picture in a single pass, in a similar way to a computer screen. A standard television uses an interlacing format, alternating lines 50 times a second, creating a full image 25 times a second. Through progressive scanning the television scans all the lines on the television in succession, and does a full screen with all lines 50 times a second, resulting in double the frame rate and higher picture quality.

4:3 Standard Displays

Code Width Height Ratio

QVGA 320 x 240 4:3
HVGA 640 x 240 8:3
VGA 640 x 480 4:3
SVGA 800 x 600 4:3
XGA 1024 x 768 4:3
XGA+ 1152 x 768 3:2
1152 x 864 4:3
SXGA 1280 x 1024 5:4
SXGA+ 1400 x 1050 4:3
UXGA 1600 x 1200 4:3
QXGA 2048 x 1536 4:3

16:9 and 16:10 Widescreen Displays

Code Width Height Ratio

WXGA 1280 x 768 5:3
1280 x 800 16:10
1366 x 768 ~16:9
WXGA+ 1280 x 854 ~3:2
1440 x 900 16:10
1440 x 960 3:2
WSXGA 1600 x 900 16:9
1600 x 1024 16:10
WSXGA+ 1680 x 1050 16:10
WUXGA 1920 x 1200 16:10
WQXGA 2560 x 1600 16:10
WQUXGA 3840 x 2400 16:10

The picture format of the TV.

4:3 - The standard picture format is 4:3 - which is the relation between the width and height of the TV screen. This is the almost square picture format that has been prevalent in the home since TV was first invented.

Widescreen - Otherwise known as 16:9. Just like the standard format it also indicates the relation between the breadth and height of the TV screen.
Widescreen is a format more adapted to the human field of vision, and a better format for viewing cinema films.

Type of sound
Mono - the sound comes through a single channel, even if the TV has two speakers.
Stereo - The sound comes through two channels and creates a more realistic, richer sound experience.
Virtual Surround - Thanks to modern techniques you can experience audio effects similar to genuine surround sound through only two speakers.
Dolby Surround - One of the most advanced and thrilling sound systems on the market. This is close as you can get to a real cinematic audio experience, with the sound coming from all directions, transferred through multiple channels.

Indicates the sound effect.
For example, 2x10W means that the model has two sound channels with a power of 10 Watts each. Watt - in short, the measure of the amplifier's power.

HD Ready
The TV can accept, process and display High Definition 720p and 1080i signals. To enjoy HDTV broadcasts it will need a device that can receive and decode the signals.
HDTV
The TV can accept, process and display High Definition signals (720p and 1080i). It also has a built-in device capable of receiving and decoding HD (720p, 1080i) Satellite, Cable or Terrestrial broadcast transmissions.

HD Ready 1080p
The TV can accept, process and display High Definition 720p 1080i and 1080p signals. To enjoy HDTV broadcasts it will need a device that can receive and decode the signals.

HDTV 1080p
The TV can accept, process and display High Definition signals up to 1080p. It also has a built-in device capable of receiving and decoding HD (720p, 1080i) Satellite, Cable or Terrestrial broadcast transmissions.

High Definition TV (HDTV) means that a TV can display high resolution images, at least 720p or 1080i. The "HD-ready" license is outlined by EICTA.
To qualify, the TV should meet the following requirements:
1. HD-reception both via analogue input and DVI or HDMI.
2. The DVI or HDMI input (digital inputs) must have support for HDCP.
3. The HD capable inputs must be able to transmit the formats 1280x720 at 50 and 60Hz progressive (720p) and 1920x1080 at 50 and 60Hz interlaced (1080i).

This is the digital equivalent of NTSC. A TV with an inbuilt ATSC tuner can receive digital TV broadcasting in US and Canada.

The three-jack (RCA/Phono) component video connection splits the video signal into three parts (one brightness and two color signals). Component video has increased bandwidth for color information, resulting in a more accurate picture with clearer color reproduction and less bleeding. A growing number of TVs include component video jacks to provide the best possible picture quality (better than S-video or composite video) when connected to a compatible DVD player. Special wide-bandwidth component video connections are capable of carrying wider bandwidth video signals, like progressive-scan DVD and High-Definition digital television. All HDTV-ready TVs include at least one set of wide-bandwidth connections for connecting a separate HDTV tuner (or progressive-scan DVD player). A component video connection can carry high bandwidth signals such as 1080i and 720p.

The number of optical digital audio outputs (Toslink) and coaxial digital audio outputs, respectively. If you have a home theater receiver, check to see which of these two digital audio connections are supported.

High Definition Media Interface. A type of connection for connecting Digital Video and Audio.

A SCART connector is a physical and electrical interconnection between two pieces of audio-visual equipment, such as a television set and a video cassette recorder (VCR). Each device has a female 21-pin connector interface. A cable with a male plug at each end is used to connect the devices. (The 21st pin is actually not a pin but a ground shield contact.) Stereo audio, composite video, and control signals are provided in both directions. RGB video signals are input only. The interface is an industry standard originated by the French company, Peritel. Today, most new television sets and VCRs in the European market and other countries that use the PAL video standard come equipped with a SCART connector. SCART stands for Syndicat francais des Constructeurs d'Appareils Radio et Television. The connector is also known as a Euro-connector.

(Universal Serial Bus) A widely used hardware interface for attaching peripheral devices. USB ports began to appear on PCs in 1997, and Windows 98 was the first Windows to support it natively. Within a few years, USB became popular for connecting nearly every external peripheral device. Replacing the serial and parallel ports on a PC, at least four USB ports are standard on every computer.Hot SwappableUSB devices can be connected to without turning the computer off, enabling removable devices to be plugged and unplugged as needed. This feature, combined with easy-reach ports on the front of the computer case, gave rise to the ubiquitous USB drive.USB 1.0 and USB 2.0USB has a maximum bandwidth of 12 Mbps for USB 1.0 and 1.1 and 480 Mbps for Hi-Speed USB 2.0. Up to 127 peripheral devices can be attached to the bus, and USB 1.1 devices can plug into USB 2.0 ports. Fast devices can use the full bandwidth, while low-speed ones can use a 1.5 Mbps sub channel.USB HubsA USB hub provides additional ports for the user. Like any other USB device, the hub plugs into a USB port on the computer and provides four or more USB ports for peripherals. The peripherals themselves may also contain hubs. For example, a monitor may have a built-in USB hub in order to provide a convenient desktop location for plugging in other devices.Type A and B, Mini-A and BThe USB ports on computers and hubs have a rectangular Type A socket, and peripheral devices have a cable with a Type A plug. Peripherals that do not have an attached cable have a square Type B socket on the device and a separate cable with a Type A and Type B plug.The Mini-A and Mini-B connectors are used on small portable devices such as PDAs, music players, digital cameras and cell phones. Hubs may use Mini-B instead of Type B for the computer connection.

A connector for a computer cable in which the plug and socket are D-shaped so they only fit together one way. DB connectors are often used for serial ports. DB-9 connectors have 9 pins and are used to connect a mouse.DB-25 connectors have 25 pins and are used to connect a printer. DB-15 has 15 pins and is used as a VGA connection to monitors.