Mobile Phone Accessories

This adaptors fits onto a IDE drive enabling it to be connected to a SATA Controller with a SATA cable (not included) Compatible with all IDE and EIDE devices, Hard Drives, DVD, CD-ROM etc Not an "Active" device, so will work with any operating system Please note only one adaptor is supplied, the picture is to illustrate both sides less info

This adaptors fits onto a IDE drive enabling it to be connected to a SATA Controller with a SATA cable (not included) Compatible with all IDE and EIDE devices, Hard Drives, DVD, CD-ROM etc Not an &... more info

The Xecuter PS3 HDXT is a caddy type frame that plugs into the PS3 internally where the 2.5" Sata drive would normally slot. You then clip on the (included) matching faceplate and you now have a clean external Sata connection. No frills and no fuss. You can now add any hard drive you wish and connect it any way you wish. less info

The Xecuter PS3 HDXT is a caddy type frame that plugs into the PS3 internally where the 2.5" Sata drive would normally slot. You then clip on the (included) matching faceplate and you now have... more info

Twin pack of cables to connect a sata device to a motherboard. This pack consists of a SATA to 5.25" power cable approximately 40cm long and a SATA data cable approximately 47cm long. This is manufactured by MyCableShop less info

Twin pack of cables to connect a sata device to a motherboard. This pack consists of a SATA to 5.25" power cable approximately 40cm long and a SATA data cable approximately 47cm long. This is ... more info

# Quick & easy installation-ideal for any mobile excutive. # Support Hot Swap and Plug-n-Play. # Compliant with Serial ATA Specification Revision 1.0 # Supports Serial ATA (Genration 1) transfer rate of 1.5Gb/s # Compliant with Programming Interface for Bus Master IDE Controller Revision 1.0 # Support two independent Serial ATA channels # Independent 256-byte FIFOs per Serial ATA channel for host reads and writes # Supports 32 bit CardBus Type II slots. # Support : win98, win98se, winME, ... less info

# Quick & easy installation-ideal for any mobile excutive. # Support Hot Swap and Plug-n-Play. # Compliant with Serial ATA Specification Revision 1.0 # Supports Serial ATA (Genration 1) transfe... more info

Suitable for all SATA devices (HDD/DVD) less info

Suitable for all SATA devices (HDD/DVD)

eSATA 7 pin male to eSATA 7 pin male Data transfer rate of up to 3Gbps (i.e Sata II). Length: 50CM / Colour: Black less info

eSATA 7 pin male to eSATA 7 pin male Data transfer rate of up to 3Gbps (i.e Sata II). Length: 50CM / Colour: Black

* Plugging Directly into your Hard Driver's IDE Port * Support the Serial ATA Transfer Rate of 1.5Gb/s (150 MB/s) * Compliant With Serial ATA 1.0 Specification * Compatible With Ultra ATA 100/133 * Support IDE Drive Size Larger than 240GB * No Driver is Needed * Mini Board Size, No Space Wasted * Support Windows 98/98SE/ME/2000/XP, Mac OS 8.6 and above less info

* Plugging Directly into your Hard Driver's IDE Port * Support the Serial ATA Transfer Rate of 1.5Gb/s (150 MB/s) * Compliant With Serial ATA 1.0 Specification * Compatible With Ultra ATA 100/133 *... more info

* Plugging Directly into Your Motherboard's IDE Port * Compliant With Serial ATA 1.0 Specification * Compatible With Ultra ATA 100/133 * Date Transfer Rate Up To 1.5 Gbps (150 MB/s) * Compliant With Seria ATA Specification * Support Windows 98/98SE/ME/2000/XP, Mac OS 8.6 and above less info

* Plugging Directly into Your Motherboard's IDE Port * Compliant With Serial ATA 1.0 Specification * Compatible With Ultra ATA 100/133 * Date Transfer Rate Up To 1.5 Gbps (150 MB/s) * Compliant Wit... more info

Interconnection between host (mother board) & device (HDD) SATA signal cable, standard molded cable less info

Interconnection between host (mother board) & device (HDD) SATA signal cable, standard molded cable

Covert standard molex to SATA power less info

Covert standard molex to SATA power

Convert single molex to 2 SATA power less info

Convert single molex to 2 SATA power

An optional Sata to IDE converter designed by Team Xecuter to use with their HDXT, or any other device that need such type of converter. less info

An optional Sata to IDE converter designed by Team Xecuter to use with their HDXT, or any other device that need such type of converter.

Compatible: USB 1.1/USB 2.0, Support: Windows 98/SE/ME/2000/XP, Mac Os8.6 or latest version. The maximum support capacity 500GB Voltage Input: AC 100~240V, 50~60Hz, Voltage Output: DC 12V/1.5A 5V/1.5A Super slim and easy portability / Shell material : Aluminium Made in China ( Sold by Mount Trader ) less info

Compatible: USB 1.1/USB 2.0, Support: Windows 98/SE/ME/2000/XP, Mac Os8.6 or latest version. The maximum support capacity 500GB Voltage Input: AC 100~240V, 50~60Hz, Voltage Output: DC 12V/1.5A 5V/1... more info

The high-capacity HM500LI 500 GB hard drive by Samsung incorporates SilentSeek and NoiseGuard technologies, giving you a quiet and efficient data storage solution!SAMSUNG SpinPoint HM500LI M6 2.5" 500 GB Internal Hard Drive - 5400 rpm - 8 MB - SATA + BEHED25A5S1 2.5" SATA External Drive Case less info

The high-capacity HM500LI 500 GB hard drive by Samsung incorporates SilentSeek and NoiseGuard technologies, giving you a quiet and efficient data storage solution!SAMSUNG SpinPoint HM500LI M6 2.5&q... more info

SATA Cable - Commonly used to connect drives to a SATA controller Latching connectors to ensure the cable remains firmly in place Length: 45CM / Colour: Red "L" type connectors - Right angled connector on one end less info

SATA Cable - Commonly used to connect drives to a SATA controller Latching connectors to ensure the cable remains firmly in place Length: 45CM / Colour: Red "L" type connectors - Right an... more info

less info